SEARCH SUBSCRIBE FIND A RETAILER     
 
   

 
   
 

Atomic Aquatics SV Series Snorkels
It was finally time to reinvent the snorkel

Atomic Aquatics only designs and releases new products that we truly believe redefine a category and solve a diver need. Did something as simple as the snorkel really require new thinking? Well...yes. More and more divers were choosing to enter the water without a snorkel because the size, unwieldiness and poor performance just wasn’t worth the hassle. Yet, the use of a snorkel during a dive can help you save precious air while hanging on the anchor line waiting to descend. There are numerous situations where a dependable, high-performance snorkel is a valuable dive tool. The new Atomic Aquatics SV Series truly redefines how a snorkel works and helps divers extend their adventure.

SV: Scupper Valve
The Atomic Aquatics Scupper Valve snorkel design is based on the same principle as the one-way Scupper Valve used in boats. If waves or splashes enter the boat, a one-way rubber flapper located on the deck near the rear of the boat opens to drain the water then quickly closes to prevent backwash. The simple Scupper Valve effectively keeps the deck free of water accumulation.

SV: Small & Versatile
Before embarking on a new design, we asked divers about the snorkels that were currently on the market. Overwhelmingly, the biggest complaint about snorkels was size. The modern Scuba snorkel had evolved into a large and difficult to manage piece of equipment. Divers were abandoning the use of their snorkels because of size, discomfort and poor performance. So Atomic Aquatics imagined a smaller, streamlined snorkel design that clears easily and is comfortable to use.

SV: Sleek & Valuable
At Atomic Aquatics, we always strive to achieve sleek and stunning designs that are as attractive as they are functional. The SV Snorkel Series is no exception. Its sleek profile makes it easy to stow or strap as a valuable addition to your dive bag. Atomic divers will WANT to take the SV Snorkel to preserve tank PSI or paddle around an exotic lagoon between dives.
 

Scupper Valve

SV2 Semi-Dry Top

 

How they work

SV Series — How they work
Just like the one-way Scupper Valve on a boat, the lower section of both the SV1 and SV2 (semi-dry) enable water to be easily expelled. Any water entering the top of the snorkel (1) bypasses the mouthpiece completely and exits out the purge valve (4). If water did enter the internal tube (2) located inside the main snorkel body, it contains a small one-way Scupper flap valve (3) designed to allow water to flow past the mouthpiece and out the purge valve (4) without collecting at the bottom of the breathing passage. The diver simply exhales a small burst of air to clear any water trapped below the mouthpiece, and the internal tube airway is kept dry. It’s so simple and so effective we have a patent pending!



Features and Benefits

Features and benefits of the SV Series high performance snorkels

The Scupper Valve (SV) design is self-draining and delivers crisp, effortless clearing. Posi-lock flex retainer secures flex section and mouthpiece. (1) Dual silicone mouthpiece prevents over-clenching of teeth that would restrict air flow. (2) Rotational mouthpiece with ratchet indicators. (3) SV1 has a conical flared top for high performance breathing. SV2 Semi-dry top is designed to limit splashed water from entering the breathing tube.





Flared Top

SV1 Flex: High-Performance Design with Conical Flared Top

Every snorkel model in the SV Series includes the Scupper Valve on the bottom mouthpiece section. Then, Atomic gives divers a choice of tops to best suit their needs. The SV1 design has a conical flared top to deliver maximum airflow. The SV1 is the optimal choice for calm waters or for strong swimming situations. Even though water may enter the open top, the internal tube airway remains dry. Any water trapped below the mouthpiece is easily cleared with a small burst of exhaled air. The flexible lower section drops the mouthpiece out of the way when not in use.




Semi Dry Top

SV2 Flex: High-Performance Design with a Semi-Dry Top

The SV2 includes a Scupper Valve lower section with a sleek semi-dry top. The SV2 semi-dry top employs horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents without entering the breathing tube. The end result is less water in your snorkel. The SV2 is perfect for rough or choppy water conditions.

SV2 with Semi-Dry Top

Perfect for use in choppy waves
The SV2 combines the same Scupper Valve lower section with the sleek and effective SV2 Semi-Dry top. The SV2 Semi-Dry top horizontal vents (1) are engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes (2) of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents (3) without entering the breathing tube. Thus, you get less water in your snorkel. The SV2 is the perfect answer for rough or choppy water conditions.

Colors

SV1 and SV2 Flex colors are designed to complement the award winning Atomic Aquatics SubFrame and Frameless masks.
Black/Clear, Reef Red, Royal Blue, Silver, and Neon Yellow. SV1 Contour Snorkels are available in Black/Clear, Reef Red, and Neon Yellow.


Snorkel Keeper

Atomic even designed a better snorkel keeper

  • Quick disconnect snorkel keeper includes 30 degree rotation.
  • Sliding snorkel keeper range adjuster allows for accurate placement without constant re-adjusting each dive.
  • Atomic Aquatics’ international and award winning styling team makes the SV1 and SV2 high performance snorkels something you would be proud to use.







 
 
CONTACT US | COMPENDIUM | PRESS RELEASES | SITE MAP | PRIVACY POLICY | TERMS OF USE | GERMAN SITE  :
 
 
©2017 Atomic Aquatics. All rights reserved. Website Design by Under Watercolours.